grain angle

[ɡreɪn ˈæŋɡl]
  • grain angle
  • n.

    纹理角度

纠错 数据更新时间:2026-04-19 19:24:58
1、

It is found that the third power of the average grain orientation angle also decreases linearly with increasing distance.

晶粒平均取向角的三次方随距离的增加而线性地减小。

互联网摘选

2、

Distribution of Grain Size and Grain Angle in Grain Line Structure of Bi_4Si_3O_ ( 12) Micro-crystals

硅酸铋(Bi4Si3O(12))晶列结构中的晶粒尺寸和晶粒夹角分布

互联网摘选

3、

The minimum values of sound velocity and dynamic Young's modulus were found at the grain angle of 45 °.

当表层单板的纤维倾斜角为45°时,木塑复合层压板的传声速度和动态弹性模量最小。

互联网摘选

4、

And the wood was found to be heterogeneous orthotropic material, its mechanical properties with the stress direction of wood grain and the angle between different, there is a great difference.

又木材被认为是非均质正交各项异性材料,其力学性能随着应力方向和木材纹路之间的夹角不同,存在着很大的差异性。

互联网摘选

5、

A direct shear apparatus development for grain internal friction angle measurement

测定粮食内摩擦角的直剪仪研制

互联网摘选

6、

The transformation from low angle grain boundaries to high angle grain boundaries makes the number of high-angle grain boundaries increase continuously and finally the grains are refined markedly.

小角度晶界向较大角度晶界不断转变的结果使大角度晶界数量不断增加,最终导致晶粒显著细化。

互联网摘选

7、

The results show that grain protrusion height, grain protrusion volume, and clearance angle are larger compared with the factory wheel, but the grain rake angle is smaller, which is different from the truncation mechanizations of finer# 270 diamond grinding wheel.

结果表明,与出厂砂轮相比,镜面加工砂轮的磨粒出刃高度、出刃体积和出刃后角要大,但出刃前角减小,这与微细270金刚石砂轮的GT修齐机理不一致。

互联网摘选

8、

Through the graphics processing of micro protrusion topography of wheel, the grain protrusion height, grain protrusion volume, grain rake angle and clearance angle were modeled.

通过砂轮微观出刃形貌的图形化处理,建立磨粒出刃高度、出刃体积、磨粒切削前角和后角等特征参数模式。

互联网摘选

9、

Finite element analysis of grinding chip formation of single abrasive grain with negative rake angle

负前角磨粒磨削过程磨屑形成的有限元仿真分析

互联网摘选

10、

The number fraction of high angle grain boundaries ( grain boundary orientation angle 15 °) in the nugget zone increased with increasing the rotation rate.

焊核区中的高角度晶界(晶界错配角15°)比例随着转动速度的提高而增加。

互联网摘选

11、

When the recrystallization completes, most of grain boundary is high angle grain boundary.

当再结晶过程完成时,绝大部分晶界为大角度晶界。

互联网摘选

12、

The results show that average values of grain protrusion height, grain protrusion volume and clearance angle of truncated grinding wheel are smaller than the ones of ideal grinding wheel, but the grain rake angle of truncated grinding wheel is larger.

结果表明,GT修齐的砂轮与理想砂轮相比,磨粒出刃高度、出刃体积和磨粒后角的平均值要小,但是,磨粒切削负前角要大。

互联网摘选

13、

The results indicate that the initial ferrite microstructure gradually developed into the equiaxed submicrometer grain microstructure with high angle boundaries with increasing the pass number.

结果表明,铁素体组织随变形道次的增加逐渐演变为等轴状大角度晶界的亚微晶组织;

互联网摘选

14、

Some column grain with large angle grain boundaries can be observed on the section surface etched by ion bombardment, and some small equal axis grains with small angle grain boundaries exist in the column grains.

从离子轰击蚀刻后的氧化膜截面上,可以区分出由大角度晶界构成的柱状晶,以及在柱状晶中由小角度晶界构成的等轴晶。

互联网摘选

  • 相关词组
  • 今日热词
  • 热门搜索
  • fireworks[ˈfaɪəwɜːks] n.烟火;烟火( firework的名词复数 );烟花;烟火表演;烟花表演;
  • gpt abbr.grams per tex 每特克数;glutamic-pyruvate transaminase 谷-丙转氨酶;xanthine-guanine phosphoribosyl transferase 黄嘌呤-鸟嘌呤磷酸核糖基转移酶(科技符号);gallons per ton 加仑/吨;
  • but[bʌt,bət] conj.但是;而是;除了;只因为;prep.除…以外;
  • a new day has come[ə njuː deɪ həz kʌm] 崭新的一天;新的一天来临;新的一天已经来临;真爱来临;
  • mop[mɒp] vt.用拖把拖;擦拭;vi.用拖把拖;擦拭;搭拉着脸;
  • free loop[fri: lu:p] n.自由回路;自由循环,自由圈
  • MOE abbr.有效措施;有效办法(Measure of Effectiveness);送人火星轨道(Mars Orbit Ejection);任务所需设备(Mission-Oriented Equipment)
  • commit suicide[kəˈmɪt ˈsuːɪsaɪd] 自杀;自寻了断;抹脖子;引决自裁;
  • DSA abbr.Defense Shipping Authority (北约)防务航运管理处;数字减影血管造影;供者特异性抗体;形稳阳极;数字血管减影;数字血管造影;数字减影术
  • presentation[ˌpreznˈteɪʃn] n.授予;提出…的方式;颁奖仪式;介绍;表演;胎儿产式;
  • crossfire[ˈkrɒsfaɪə(r)] n.穿越火线;交火;交叉火力;来自多方面的攻击;卷入两者的争执中并因此遭殃;(可能偶然影响未直接参与者的)激烈言行;
  • netflix['netfliːks] n.网飞;网飞公司;奈飞;全球十大视频网站中唯一收费站点;

微语录(www.volg.cn)为您提供在线词典、英语翻译、单词大全、英译汉、汉译英等英语服务!可通过lj:关键词格式搜索句子,如lj:affect,搜索affect相关的双语例句!

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈